Nexiq Blue-Link ELD 16-Pin OBDII Bluetooth Device
$279.99
5.0 / 5.0 based on 1 review
Nexiq SKU: EESM607NX
The Nexiq Blue-Link ELD is designed to work with the various ELD software manufacturers. This version is designed for vehicles with an OBDII connection.
Features
- 1939 Protocol
- OBD CAN (ISO15765) Protocol
- Calculated Engine Hours If No ECM Support
General Support
- Seamless Background OTA Firmware Updates
- Secure Communications and Firmware Updates
- Limited access to BLE bondable mode via physical pushbutton on device with built-in timeout.
- All communications between mobile client and device employ standard BLE encryption.
- Authentication required between mobile client and device to enable datalink communications, and to enable OTA device firmware update.
- Encrypted firmware update file.
- Running firmware locked and encrypted to prevent data extraction.
- Automatic Vehicle Link Detection for ELD Data of Interest (Engine Controller)
- CAN auto-baud detection
- Calculated Odometer Support If No ECM Support
- Fully-Documented Driver/Device API for Developing Mobile Apps To Communicate with the ELD
Bluetooth Support During Active Connection
- Device Notification of Powered-On Date and Time
- Log Record Parameter Support with Selectable Raw Data or Pre-Scaled Format, with the following information
- GPS position and UTC time data
- Vehicle Identification Number (VIN)
- Engine serial number
- Odometer
- Engine hours
- Vehicle speed
- Log Records Notifications Automatically Occur at 15-Minute Intervals
- Updated Log Record Can Also Be Requested Immediately by Mobile Client
- Automatic Notification Of Each Vehicle Motion State Change
- Key Off
- Key On (Engine Off)
- Key On (Engine Running)
- Automatic Notification of Each Vehicle Motion State Change
- In-motion event = vehicle exceeds 5mph after being considered motionless
- Motionless = vehicle motionless for more than 3 seconds after being considered in-motion
- Automatic Data Capture Timeout Notifications
- Device checks for more than 5 seconds without one or more required core parameters being received from expected source (ECM or calculated), and sends notification to client application on each occurrence.
- The following parameters subject to DCT check:
- Odometer
- Engine hours
- Engine speed
- Vehicle speed
- Configurable Distance Traveled Notifications
- Device sends periodic odometer notifications to mobile client for specified distance traveled. Default trigger is 5 miles, configurable via API call.
- Configurable Hard Driving Detection and Notifications:
- User-configurable mph/s threshold for device detecting hard acceleration/deceleration events and sending notifications back to mobile client
Bluetooth Support During Vehicle Activity with no Application Connection
- Log Record on-device archiving, with flag indication of reason for each capture.
- On subsequent mobile application connection, archived log records can then be retrieved via the following defined API commands:
- 15-minute periodic capture when engine running
- Ignition-on (engine running) / Ignition-off events
- Driving / Not Driving Events
- Driving = 5mph or greater detected
- Not Driving = motionless for more than 5 minutes after "Driving" event detected
- Initial Data Capture Timeout event, i.e., first time any of 4 core parameters not received within 5-second timeout is detected.
- Data Capture Recovery event, i.e., all four core parameters received within 5-second window after initial Data Capture Timeout event has been previously captured.
![Return Policy](http://www.diesellaptops.com/cdn/shop/files/ReturnPolicy.jpg?v=14427808103328611669)
Easy Returns
When you buy from Diesel Laptops, we want to make sure you're happy with your purchase. You may return this product within 30 days of delivery, with a small 15% restocking fee. It's part of how we keep things fair for everyone.
For more details, please visit our Return Policy page below.