SP05 AutoEnginuity with Ford, GM, Dodge, & Chevrolet Enhanced
Click To Enlarge

AutoEnginuity with Ford, GM, Dodge, & Chevrolet Enhanced

Price: $799.95
  • Item #: SP05
  • Manufacturer's Product Number: SP05
* Marked fields are required.
Qty: *

This package from AutoEnginuity will allow you to view diagnostic codes on EVERY engine, plus it allows you to have full bi-directional control on all the major domestics -- Ford, GM, Dodge, and Chevrolet. This package gives you the ability to perform tests such as:

Ford Family - Supports over 7,900 sensors from 122 systems. This includes support for non-US models such as Ka, Mondo, Galaxy, and Fairline.

  • PATS Timed Key Programming ('96 - '08)
  • KOEO
  • KOER
  • Power Balance (CAN-based models)
  • EVAP Bay Test
  • Service Bleed (Non-CAN support not available with ProLine currently)
  • Buzz Injector
  • Cylinder Contribution Test
  • Switch Test
  • Glow Plug Test
  • System Self-Test
  • Low - and High Speed Fan
  • All Outputs On/Off
  • Injector Coding (1.8L and 2.0L)
  • KAM Reset
  • Misfire Monitor Neutral Profile Correction
  • Tire Size Programming up to 40" ('99-'03 7.3L, and '04-'07 6.0L trucks)
  • IVD Initialization
  • Steering Angle / Yaw Rate / Acceleration Sensor Reset ('03 Explorer and Lincoln LS)
  • Passenger Seat ReZero and Passenger Weight Reset
  • Power Seat Calibration Test
  • Audio Network Communication Test
  • Vehicle In-Motion IO Test
  • Front Wiper Self-Test
  • Rear Wiper Self-Test
  • Diesel Particulate Filter Reset, Clear EGR Adaptive Tables, and Clear Fuel Injector Adaptive Tables

GM Family - Includes support for Buick, Cadillac, Chevrolet, GMC, Hummer, Oldsmobile, Pontiac, and Workhorse. Over 6,000 sensors from over 68 systems is supported. There are over 2,000 bi-directional command and system level tests that can be performed!

  • ABS Automated Bleed Routine (ProLine Connector)
  • Crank Variation Learn
  • Injector Flow Rate Programming (CAN-based Diesels)
  • Key Fob Programming
  • SDM Setup and Part Number Programming
  • Idle Learn
  • TDC Learn
  • Tire Pressure Sensor ID Programming (via CAN-based Remote Control Door Lock Receiver)

Chrysler/Dodge/Jeep - Coverage includes diesel Cummins engines, Dodge Sprinters Vans, and much more!

  • EGR System Test
  • EVAP System Monitor Service Test
  • Erase All DTC Fault Codes
  • Generate Full Field Test
  • Gov & 3-4 Shift Valve Test - JTEC Only
  • Leak Detect Pump Test
  • Purge Vapors Test
  • Reset All Adaptive Memory Fuel Cells
  • Reset All Non-Volatile Memory
  • Reset CAM/Crank Misalignment
  • Reset CAM, Crank, and Sync Status Record
  • Reset Duty Cycle Monitor
  • Reset Engine Running Time Record
  • Reset Fuel Shut-off Record
  • Reset Intake Airflow Control Stepper Motor Position
  • Reset Trip Information
  • Set Sync Signal - JTEC Only
  • Set Minimum Throttle Position to Maximum
  • Torque Converter Clutch Test - JTEC Only

Watch this tool in action!

Reviews (0) Write a Review
No Reviews. Write a Review